A worn grinding plate can turn a clean pass of meat into a frustrating mash, especially when the knife and plate no longer meet properly. Buyers searching for Best Meat Grinder Plates are usually trying to restore a grinder, change the texture of a batch, or keep a sausage-making setup supplied with the right replacement parts. The catch is that a plate is not a universal accessory. Diameter, thickness, center opening, hole pattern, and mounting tabs all have to match the grinder head.
The most common mistake is buying by appearance or by the nominal grinder number alone. Two #12 plates can still differ in thickness, center-hole design, or tab placement. A second mistake is confusing a plate with a cutting knife. The knife and plate work together, so replacing one worn part may leave poor results if the other is also damaged. Material and cleaning instructions matter too. Several options here use stainless steel, but their dishwasher guidance and exact compatibility claims are different.
The comparison focuses on replacement plates and plate-and-knife sets in several sizes. A compatible grinder, the correct outside diameter and center opening, and the hole size suited to the intended grind matter more than a generic size label alone.
Quick Answer
- BOLEXINO #12 4.5mm Plate is the clearest match for a #12 grinder needing a fine-medium plate for a second grind or common sausage recipes.
- OUSTUE #12 6 mm Plate provides a single medium-sized opening option for a measured, compatible grinder.
- Together-life Seven-Piece Set suits owners of compatible 55mm grinders who need several plates and replacement cutters in one package.
- National Band Saw #32 Plate and Knife Set combines replacement components for a compatible #32 grinder.
Best Meat Grinder Plates Comparison Table
| Product | Best For | Documented Size or Plate Range | Material and Included Parts | Main Limitation |
|---|---|---|---|---|
| BOLEXINO #12 4.5mm Plate | Fine-medium sausage grinding | 69mm diameter, 4.5mm holes, 10mm center hole | Stainless steel, one plate | Requires exact #12 compatibility |
| OUSTUE #12 6 mm Meat Grinder Plate | #12 6 mm plate | 6 mm openings | Stainless steel replacement disc | Single plate; confirm the fit |
| Together-life Seven-Piece Set | 55mm grinder owners | Approximately 55mm discs, 7mm center hole | Five plates and two cutters | Hand wash only for discs |
| OUSTUE #22 6 mm Meat Grinder Plate | #22 replacement plate | 6 mm openings | Stainless steel replacement disc | Confirm #22 dimensions before ordering |
| OUSTUE #12 10 mm Meat Grinder Plate | #12 coarse option | 10 mm openings | Single stainless steel disc | Only one hole size included |
| BOLEXINO #12 Stainless Steel Plate and Knife Set | Multiple #12 textures | Four plates and two knives | Stainless steel plates and knives | Confirm fit before ordering |
| National Band Saw #32 Grinder Plate and Knife Set | #32 replacement set | Plate and knife set | Raised-edge knife and plate | Check compatibility with the exact machine |
| #12 Stainless Steel 12 mm Meat Grinder Plate | Coarse #12 grinding | 12 mm openings | Single stainless steel plate | Only one hole size included |
| TASP #8 1/8-Inch Grinder Plate | Fine #8 grinding | 1/8-inch openings | Single stainless steel plate | Check the exact grinder fit |
The first five options are the closest matches for replacement-plate shopping. The final three are complete grinder systems that include plates, so their reviews explain where they fit and where they do not.
1. BOLEXINO #12 Stainless Steel 4.5mm Meat Grinder Plate — Best Overall
The BOLEXINO plate is the most direct fit for a buyer who already owns a compatible #12 grinder and wants a defined fine-medium grind. Its listed 4.5mm openings are positioned for a second pass, breakfast sausage, Polish sausage, Italian sausage, and similar preparations. That makes it more targeted than a mixed replacement set when the desired texture is already known. A cook preparing a batch of pork shoulder for links, for example, can use a coarse pass first and then move to this smaller plate for a tighter mixture.
The plate measures 69mm across, has a 10mm center opening, and is listed at 8mm thick. Those dimensions are more useful than the #12 label by itself because grinder heads can vary. Its hubless design allows use on either side, according to the supplied product information, while the stainless steel construction is intended to resist rust, corrosion, and wear. The maintenance note is practical: wash it in warm, soapy water, dry it carefully, and apply a small amount of vegetable oil for storage. That last step matters in a drawer where residual moisture can leave orange spotting on otherwise clean metal.
Pros
- 4.5mm openings suit a fine-medium second grind.
- Documented 69mm diameter, 10mm center hole, and 8mm thickness make measurement possible.
- Stainless steel construction is intended for repeated food-preparation use.
- Hubless design permits use on either side.
- Its stated applications include several common sausage styles.
Cons
- It is a single plate, so it does not provide several textures in one purchase.
- Compatibility depends on matching the listed dimensions and #12 grinder fit.
This is the sensible choice for someone standing at the counter with a #12 grinder and a plate that has become dull, stained, or poorly matched to the knife. It is less useful for a buyer who wants a full range of coarse openings or who has not measured the original part. The 4.5mm size gives the product a clear role, which is often preferable to a vague “universal” replacement. Check the grinder head before ordering, then dry and oil the plate before storage.
To buy this product, click here.
2. OUSTUE #12 6 mm Meat Grinder Plate — Best for a 6 mm #12 Plate
This OUSTUE listing is for the 6 mm option in a range of separately selected #12 plate variants. It is a replacement disc, not a package containing every hole size shown on the product page. A 6 mm opening gives a buyer a defined size to compare with a recipe or existing plate.
The listing identifies stainless steel and describes tabs that align with the grinder housing. Measure the outside diameter, center opening, thickness, and locating features against your original; nominal #12 sizing and a list of brands do not guarantee compatibility.
Pros
- The selected ASIN is a #12 replacement plate.
- The 6 mm opening provides a specific grind option.
- Stainless steel construction is listed.
- The plate can replace a worn compatible disc.
- The size designation helps narrow the fit check.
Cons
- This selection is one plate, not a multi-size set.
- Measurements and mounting features must match the grinder.
Compare the part against your original components and confirm the seller’s current specifications before ordering.
To buy this product, click here.
3. Together-life Seven-Piece Stainless Steel Plate and Blade Set — Best for 55mm Grinder Owners
The Together-life set serves a different size class from the #12 plates above. Its supplied specifications describe components for grinders using approximately 55mm discs, with a 7mm center hole. That makes it relevant to owners of a smaller food chopper or meat mincer, but it also creates a firm compatibility boundary. A plate can be beautifully clean and correctly made yet still be unusable if its diameter or center opening does not match the grinder’s worm and housing.
Five grinding plates and two cutting blades are included, giving the set a useful replacement-parts role. The descriptions divide the plates into coarse, medium, and fine applications, including meat, hard cheese, dried bread, vegetables, breadcrumbs, and slow-cooked meat. Those descriptions identify intended uses rather than measured output. The 420 stainless steel construction is listed as rust-resistant and durable, while the discs are specifically marked for hand washing rather than dishwasher cleaning. That extra drying step is easy to overlook when several small parts are spread beside the sink.
Pros
- Includes five plates for multiple preparation textures.
- Supplies two replacement cutting blades with the plate set.
- Documented approximately 55mm disc size and 7mm center hole help narrow compatibility.
- 420 stainless steel is listed for the replacement components.
- Applications include meat, breadcrumbs, vegetables, and hard cheese.
Cons
- Discs are listed as hand wash only, not dishwasher-safe.
- It is intended for approximately 55mm grinders, not the #12 systems listed elsewhere.
This is the practical pick for a smaller grinder owner who needs a complete collection of wear parts rather than one replacement plate. It could be useful in a home where the same machine moves between burger meat, breadcrumbs, and cooked ingredients. It is a poor choice for a #12 grinder simply because the set contains several pieces. Measure the existing plate and center opening first, and keep the hand-wash instruction visible after the first cleanup.
To buy this product, click here.
4. OUSTUE #22 6 mm Meat Grinder Plate — Best for a #22 Replacement Plate
This OUSTUE disc is listed for #22 grinders with 6 mm openings. It adds a different grinder size to the comparison for owners whose existing plate is larger than the #12 options. It is a replacement component, not a full machine or cutting knife.
The seller lists an approximately 81 mm outside diameter, 11 mm center hole, and 9 mm thickness. These figures are useful starting points for comparing the original plate, but tabs, knife alignment, and the exact grinder model must also match before purchase.
Pros
- Listed as a #22 replacement grinding plate.
- A 6 mm opening gives a defined grind size.
- The listing specifies stainless steel construction.
- Published dimensions support a fit check.
- One disc can replace a worn compatible plate.
Cons
- It will not fit a grinder requiring a smaller plate.
- The seller’s measurements and locating tabs must match the original.
Compare the part against your original components and confirm the seller’s current specifications before ordering.
To buy this product, click here.
5. OUSTUE #12 10 mm Meat Grinder Plate — Best for a Coarser #12 Plate
This OUSTUE #12 listing identifies the 10 mm variant, a coarser alternative to the 6 mm plate in the same family. A larger opening may suit a first grind or a recipe seeking more visible texture, while a finer plate can be chosen separately for a later pass.
The product page presents several sizes as individual options; ordering this ASIN should not be interpreted as buying the entire range. Check the original disc’s diameter, thickness, center opening, and tabs against the selected listing and your grinder instructions.
Pros
- The 10 mm openings offer a coarser option.
- The selected product is a #12 replacement plate.
- Stainless steel construction is listed.
- One disc can replace a matching worn plate.
- Different hole sizes are offered as separate options.
Cons
- The selected ASIN is not a set of all listed sizes.
- A 10 mm opening is not a substitute for a finer plate.
Compare the part against your original components and confirm the seller’s current specifications before ordering.
To buy this product, click here.
6. BOLEXINO #12 Stainless Steel Plate and Knife Set — Best for Multiple #12 Textures
A set with several plates can be useful when one grinder handles more than one recipe. This BOLEXINO listing describes four #12 stainless steel plates and two knives, giving owners several replacement components in a single package.
Check the original plate diameter, thickness, center opening, and locking features against the seller’s specifications. A #12 label is a starting point rather than a guarantee that every grinder accepts the parts.
Pros
- Includes four grinding plates.
- Two knives are included with the set.
- Plates are listed for #12 grinders.
- Stainless steel construction is listed.
- Multiple plates offer more than one grinding option.
Cons
- The set is unnecessary if only one compatible plate is needed.
- Fit depends on the grinder’s exact dimensions and mounting design.
Compare the part with your grinder’s original components, then follow the care instructions supplied with the replacement.
To buy this product, click here.
7. National Band Saw #32 Grinder Plate and Knife Set — Best for #32 Plate and Knife Replacement
This National Band Saw set combines a #32 grinder plate and a matching knife. It is relevant when an existing machine needs both cutting components replaced rather than an entire new grinder.
The listing describes a raised-edge knife and names compatible grinder brands, but a brand name alone does not establish that every model will fit. Compare the plate, knife, center opening, and mounting geometry with the original parts before ordering.
Pros
- Combines a grinding plate and knife.
- The listing identifies the set as #32.
- A raised-edge knife is included.
- Designed as replacement cutting components.
- Useful when both the knife and plate need replacement.
Cons
- It is not intended as a replacement for smaller grinder sizes.
- Compatibility must be checked against the exact grinder model.
Compare the part with your grinder’s original components, then follow the care instructions supplied with the replacement.
To buy this product, click here.
8. #12 Stainless Steel 12 mm Meat Grinder Plate — Best for a Coarse #12 Pass
This #12 replacement plate is listed with 12 mm openings, making it a coarse option for a first pass or a recipe where a more open texture is wanted. It is a single plate, not a complete grinder or a range of hole sizes.
The listing describes stainless steel construction. Measure the plate already in your grinder and compare the outside diameter, center hole, thickness, and alignment features before treating the nominal #12 size as a match.
Pros
- Listed as a #12 replacement grinding plate.
- The 12 mm openings provide a coarse option.
- Stainless steel construction is listed.
- A single plate avoids buying a full grinder.
- Useful for buyers who specifically need larger openings.
Cons
- Only one grinding-hole size is included.
- A coarse 12 mm plate is not a substitute for a finer plate.
Compare the part with your grinder’s original components, then follow the care instructions supplied with the replacement.
To buy this product, click here.
9. TASP #8 Meat Grinder Plate with 1/8-Inch Holes — Best Fine #8 Plate
This TASP replacement plate gives owners of a compatible #8 grinder a fine-hole option without buying a new machine. The Amazon listing describes 1/8-inch openings and stainless steel construction, with one plate in the package. The smaller openings make it worth considering when the desired recipe calls for a finer grind than a coarse plate provides.
The listing refers to LEM and other #8 grinders, but the nominal size and brand name are not a substitute for an exact fit check. Compare the original plate’s outer diameter, center opening, thickness, and locating features before ordering. The seller also advises pairing the plate with an appropriate knife; inspect both cutting components and follow the grinder’s instructions.
Pros
- Listed as a replacement plate for #8 grinders.
- Fine 1/8-inch openings offer a smaller grinding option.
- Stainless steel construction is listed.
- A single plate can replace one worn component.
- The product is available in several hole-size options.
Cons
- This selection includes one hole size rather than a multi-plate set.
- The #8 designation alone does not guarantee fit in every grinder.
The TASP plate suits an owner who has measured a compatible #8 grinder and wants this particular fine opening. Anyone who needs a selection of textures may prefer a plate set, provided its dimensions match the machine.
To buy this product, click here.
Buying Guide
Match the Plate to the Grinder Head
Start with the old plate, not the product title. Measure its outside diameter, thickness, center opening, and any tabs or locating features. The supplied listings include approximately 55mm components, 69mm #12 plates, and a plate listed near 70mm. Those figures are close enough to cause confusion but different enough to prevent a reliable fit. The grinder’s nominal size narrows the search, yet the physical measurements decide whether the replacement belongs in the housing.
Check the Hole Diameter and Intended Grind
Hole size affects the type of pass a plate is intended to provide, but labels such as fine, medium, and coarse are not perfectly standardized across sellers. The BOLEXINO plate lists 4.5mm openings for a fine-medium second grind. Other individual #12 plates and sets offer different openings; verify which size is included in the selected listing. A cook making sausage may use a larger opening for an initial pass and a smaller plate for a second pass, while a burger recipe may call for a more open texture. Choose from the actual documented opening, not a vague marketing label.
Inspect the Knife and Mounting Geometry
A grinding plate works with a cutting knife. If the knife edges are worn, a new plate may not solve poor grinding. Replacement sets such as the Together-life package and the #12 options here include blade components, while the BOLEXINO listing is a plate-only purchase. Confirm that the blade fits the square shank and that the plate tabs align with the grinder body. The part should seat securely without forcing it into place.
Do Not Treat Stainless Steel as a Compatibility Guarantee
Stainless steel is useful for a replacement component because it is intended to resist rust and wear, but the material does not make plates interchangeable. A stainless 55mm disc cannot replace a 69mm #12 disc simply because both are metal. Also separate the material of the plate from the material of the grinder housing, auger, or blade. The supplied listings identify stainless steel for particular components, not necessarily every part of each machine.
Follow the Specific Cleaning Instructions
Cleaning advice differs across the products. The BOLEXINO listing recommends warm, soapy water, drying, and a small amount of vegetable oil for storage. The Together-life discs are listed as hand wash only. Other plates and knives may have different cleaning requirements, so consult the instructions for the exact replacement part. Dry plates fully before storage, especially when they will sit in a drawer between sausage-making sessions.
Replace the Correct Component
A grinding plate is one part of a grinder, not a motorized machine. Check the knife and auger as well as the plate before ordering a replacement, and purchase only parts supported by the grinder manufacturer or seller.
Best Meat Grinder Plates FAQ
Are all #12 meat grinder plates interchangeable?
No. The #12 designation helps identify a general grinder size, but diameter, thickness, center-hole design, and mounting tabs can vary. Compare the original plate with the replacement listing before ordering. The #12 products here list diameters around 69 to 70mm, but that alone does not prove a fit.
What plate size is useful for sausage?
That depends on the sausage style and whether the meat receives one pass or two. The BOLEXINO plate lists 4.5mm openings and describes a fine-medium second grind for several sausage types. Larger openings in the 6mm to 18mm range may suit a first pass or a coarser texture. Follow the recipe and compare the listed hole size with the result you want.
Should I replace the knife and plate together?
Replace both when either component is visibly worn, damaged, or no longer cutting cleanly with the other. Some replacement sets include plates and blades, while the BOLEXINO product is a single plate. The blade must align with the plate and the grinder worm, so a plate alone may not restore performance if the knife edge is also compromised.
Can I use a 55mm plate in a #12 grinder?
No, not based on the supplied dimensions. The Together-life set is described for approximately 55mm grinders with a 7mm center hole, while the #12 options list diameters near 69 or 70mm and a 10mm center hole. Those are different component sizes. Measure the grinder and original plate rather than adapting parts that do not match.
Are stainless steel grinder plates dishwasher-safe?
There is no universal answer. The Together-life discs are listed as hand wash only, while other replacement parts may have different instructions. The BOLEXINO listing recommends warm, soapy water and drying. Follow the instructions for the exact product, and never immerse an electric motor housing.
Can these plates grind bones?
The supplied plate listings do not establish bone-grinding capability. A plate’s material or hole size does not prove that the grinder, knife, motor, or housing can safely process bones. Use these components only for applications supported by the exact grinder instructions.
Does a plate set fit every grinder of the same nominal size?
No. Compare the outer diameter, thickness, center opening, and locating features with the original plate, and check the exact model compatibility before ordering.
Final Verdict
The BOLEXINO #12 4.5mm plate is the strongest overall match for a buyer who already owns a compatible #12 grinder and wants a clearly defined fine-medium plate for sausage or a second pass. Its listed 69mm diameter, 10mm center hole, and 8mm thickness give the buyer concrete dimensions to compare, while the single-plate format avoids paying for parts that may remain in a drawer. Confirm the fit before ordering and protect the plate from moisture during storage.
The BOLEXINO multi-plate set offers different openings, while the Together-life package is aimed at smaller 55 mm grinder systems. For a larger machine, the National Band Saw set combines a #32 plate and knife. Compare the actual dimensions and intended grind before ordering; nominal size alone does not ensure fit.
